Color Guard I Usage Instructions

Color Guard I – Jaundice (no preservative properties)

Color Guard I does not contain preservative chemicals so will not firm the body. It is intended to be used with a low to moderate index arterial fluid.

• Use 8 to 16 ounces per gallon of cool or cold water, depending on the intensity of yellow color present and color development desired.
• Add 7 to 12 ounces of arterial fluid according to professional preference. Use only with a low to moderate index arterial fluid.
• Inject using intermittent drainage so it will be well distributed into all the required areas of the body. Color development will take place over a short period of time.

We highly recommend first trying the fluid on an area of the body that will not be shown.

To test the reaction of Color Guard I on a particular body, mix 10cc of Color Guard I with 10cc of arterial fluid and inject into the hip area. A red-pinkish tone should appear after a short time. Once appropriate levels are established for that particular case, the rest of the body can be treated.